delivery icon

pickup icon

24/7 CUSTOMER SUPPORT +1(647)-323-4537 | SHOWROOM 287 BRIDGELAND AVENUE TORONTO, ON CANADA M6A 1Z6 | MON-FRI 9AM-5PM , SAT-SUN 10AM-5PM
Log in Sign up
Cart (0)
Caesarstone 4011 Cloudburst Concrete Quartz Slab 65-Inch x 131-Inch (58.90 sq. ft./slab)
Sale

Caesarstone 4011 Cloudburst Concrete Quartz Slab 65-Inch x 131-Inch (58.90 sq. ft./slab)

SAPPHIRUS STONE & TILE INC.

$46.13 $57.66

Double Bevel

It is recommended to soften the top and bottom of edge

Bevel

It is recommended to soften the top and bottom of edge

Full Bullnose

Double Bullnose

Triple Laminated Bullnose

Ogee

Miter

Recommended for Supernatural design. Top radius should be 1/8” (3mm)

Double Radius

laminated 1/4” (7mm) round top and bottom

Pencil

1/4” (7mm) recommended

Eased

1/8” (3mm)
Product / Species 4011 Cloudburst Concrete Quartz Slab
Thickness 20mm or 30mm / 0.78'' or 1.18''
Width 1640mm / 64.5''
Length 3327mm  / 131''
Surface Texture Polished Finish
Colour Group Cream-Based Concrete with Subtle Pure White
Pattern No Veins
Material Quartz
Book Match No
Hardness (Mohs) 6 - 7
Certification  NSF / GREENGUARD
Slab Size 131'' x 64.5'' (Jumbo Size)
Warranty 20 Year Residential Ltd. / 5 year Commercial Ltd.
Application Indoor

Daily Cleaning

For daily care, we recommend using mild,
non-abrasive soaps and water. Dawn or 50/50 mix of Vinegar and water are great for daily clean up.

Disinfecting Counters

Lysol wipes, disinfectant spray, and rubbing alcohol 60% or greater can be used for disinfecting. Bleach must be diluted before using.

Other Stains

For harder to remove stains, we recommend using the Vim Cream or Bar Keepers Friend cleaner.

Includes stains such as: food coloring, herbs and spices, red wine, mustard, coffee/tea, fruits, ink, markers, paint, print from supermarket bags, hair shampoo, medical creams, make-up, olive oil, canola oil, machine oils.

Because of the abrasive nature of this cleaner, place a small amount on a damp paper towel or clean cloth.

Using light pressure, wipe the area in a circular motion where the marks are, rinsing thoroughly with warm water and dry with a soft cloth or paper towel.

For more stubborn stains, allow the cleaner to sit on the surface no more than a minute and do not allow to dry. This is for special spot cleaning only. Do not use a scouring pad.

Are wipes safe to use?

Lysol wipes are safe to use on your countertops. Avoid wipes and cleaners specific to granite and natural stone. When it comes to disinfecting your surface, please take the proper precaution and remember that disinfecting should not take the place of your daily cleaning routine.

Where can I find the recommended cleaning products?

You can find them at local hardware stores and most department stores in person or online. You can also visit the brand’s website and look for their “Where to Buy” option to find retailers in your area.

What to Avoid

Prolonged exposure to cleaning solutions may cause permanent damage/discoloration to the countertop surface. Avoid exposing the surface to chemicals, such as oven grill cleaners, floor strippers, paint removers/strippers, toilet bowl cleaners, oil soaps, tarnish removers, furniture cleaners, drain products, battery acid, dishwasher detergent, etc. Should your surface accidentally be exposed to any potentially damaging products, rinse immediately with water and wipe dry.

Cleaning Honed, Rough and Concrete Finishes

Honed, Rough and Concrete finishes have more exposed surface area, which means fingerprints, metal marks and other signs of daily living will be more apparent but still relatively easy to maintain. They can require more daily maintenance than other product finishes. For tougher spills and stains, apply a multi-purpose cream cleaner on a cloth or a damp paper towel gently rubbing in a circular motion. Thoroughly rinse with water to remove cleaner and dry the surface with a clean cloth or paper towel. 


  • SINK CUTOUTS MUST HAVE A MINIMUM RADIUS OF 1/2" FOR EACH CORNER
  • L-SHAPED CUTS MUST HAVE A MINIMUM INSIDE CORNER RADIUS OF 1/2" IF NO SEAM IS USED

  • THIS WARRANTY PROGRAM APPLIES TO THE ORIGINAL PURCHASER OF SAPPHIRUS STONE & TILE. FOR A SINGLE- FAMILY HOME, THE ORIGINAL PURCHASER REFERS TO THE ORIGINAL OWNER WHO HAS SAPPHIRUS STONE & TILE PERMANENTLY INSTALLED IN HIS/HER RESIDENCE. IF THE PRODUCT WAS PURCHASED THROUGH A BUILDER (FOR A NEWLY CONSTRUCTED HOME), THE WARRANTY APPLIES TO THE FIRST OWNER OF THE PROPERTY WHO PURCHASED AND INSTALLED SAPPHIRUS STONE & TILE IN HIS/HER RESIDENCE. THIS WARRANTY DOES NOT COVER ANY RESIDENCE WHERE THE FIRST OWNER IS NOT THE OCCUPANT.

  • THIS WARRANTY EXPIRES UPON TRANSFER OF OWNERSHIP OF THE PROPERTY TO SUBSEQUENT PARTIES. THIS WARRANTY IS NOT TRANSFERABLE AND DOES NOT COVER CLAIMS MADE BY SUBSEQUENT OWNERS OF YOUR HOME.
  • THIS WARRANTY APPLIES ONLY TO SAPPHIRUS STONE & TILE WHICH HAVE BEEN PERMANENTLY INSTALLED IN AN INTERIOR APPLICATION AND HAS NOT BEEN REMOVED FROM THE ORIGINAL INSTALLATION AREA(S).
  • THIS WARRANTY APPLIES ONLY TO SURFACES WHICH HAVE BEEN MAINTAINED ACCORDING TO THE SAPPHIRUS STONE & TILE , CARE & MAINTENANCE GUIDE. THIS WARRANTY DOES NOT COVER DAMAGE CAUSED BY PRODUCT MISHANDLING, IMPROPER CARE AND MAINTENANCE, IMPACT DAMAGE, HEAT DAMAGE, PHYSICAL AND CHEMICAL ABUSE, AND DAMAGE RESULTING FROM EXPOSING THE PRODUCT TO EXTREME WEATHER CONDITIONS.
  • THIS WARRANTY COVERS SAPPHIRUS STONE & TILE THAT HAVE BEEN INSTALLED BY SAPPHIRUS STONE & TILE'S NETWORK OF CERTIFIED FABRICATORS AND INSTALLERS WHO FOLLOW THE GUIDELINES AND PROCESSES SET FORTH IN THE SAPPHIRUS STONE & TILE FABRICATION AND INSTALLATION MANUAL. IT IS THE SOLE RESPONSIBILITY OF THE OWNER(S) OF THE RESIDENCE(S) TO ENSURE THAT CERTIFIED FABRICATORS AND INSTALLERS ARE USED FOR THEIR PROJECTS. THIS WARRANTY DOES NOT COVER ANY IMPROPER/DEFECTIVE WORKMANSHIP PERFORMED BY ANY FABRICATOR, WHETHER CERTIFIED OR NOT, WHO DOES NOT FOLLOW THE REQUIREMENTS SET FORTH IN THE SAPPHIRUS STONE & TILE FABRICATION AND INSTALLATION MANUAL. PLEASE CONTACT YOUR AREA DISTRIBUTOR(S) TO INQUIRE MORE ABOUT SAPPHIRUS STONE & TILE'S NETWORK OF CERTIFIED FABRICATORS AND INSTALLERS.
  • VISUAL INSPECTION OF THE SLABS PRIOR TO FABRICATION IS VERY IMPORTANT. FABRICATORS ARE REQUIRED TO PERFORM DETAILED INSPECTION OF THE SLABS AT THE TIME OF THE PURCHASE AND PRIOR TO FABRICATION. THIS WARRANTY DOES NOT COVER ANY PRODUCT DEFECTS THAT WERE VISIBLE AT THE TIME OF PURCHASE AND/OR PRIOR TO FABRICATION.
  • THIS WARRANTY DOES NOT COVER CHIPS, SCRATCHES, COLOR VARIANCES, THERMAL SHOCK, MISUSE OR IMPROPER/DEFECTIVE FABRICATION. MAKE SURE TO CHECK YOUR SAPPHIRUS STONE & TILE COUNTERTOPS THOROUGHLY AT THE TIME OF INSTALLATION. SAPPHIRUS STONE & TILE 'S QUARTZ ARE HIGHLY RESISTANT TO SCRATCHES, BUT THEY ARE NOT SCRATCH PROOF. NO CUTTING SHALL BE DONE DIRECTLY ON THE SURFACE AND A CUTTING BOARD SHALL ALWAYS BE USED. PROPER CARE AND MAINTENANCE SHALL BE FOLLOWED AT ALL TIMES REFER TO THE SAPPHIRUS STONE & TILE'S QUATZ CARE & MAINTENANCE GUIDE.
  • THIS WARRANTY DOES NOT COVER ADDITIONAL MODIFICATIONS OR SUPPLEMENTAL REPAIRS SUCH AS STRUCTURAL CHANGES, PLUMBING, ELECTRICAL, CABINETS, TILES, ETC. THAT MAY BE NECESSARY TO COMPLETE THE REPAIR OR REPLACEMENT OF SAPPHIRUS STONE & TILE QUARTZ COUNTERTOPS COVERED UNDER THIS WARRANTY. THESE MATERIAL AND LABOR COSTS SHALL BE THE RESPONSIBILITY OF THE CUSTOMER.
  • THIS WARRANTY ONLY APPLIES TO POLISHED FINISHES. IT DOES NOT APPLY TO SURFACES WITH HONED AND TEXTURED FINISHES.
  • THIS WARRANTY DOES NOT COVER FINISHES THAT HAVE BEEN ALTERED FROM THEIR ORIGINAL SAPPHIRUS STONE & TILE  QUARTZ FACTORY-APPLIED FINISH. ANY ISSUES ARISING FROM THE PRACTICE OF "ADDITIONAL AND/OR IN SHOP HONING" ARE THE SOLE RESPONSIBILITY OF THE FABRICATOR WHO PERFORMED THE PROCESS AND/OR THE OWNER WHO PURCHASED THE ORIGINAL SAPPHIRUS STONE & TILE QUARTZ SURFACES.
  • THIS WARRANTY DOES NOT COVER ANY CREATIVE ADJUSTMENT MADE TO THE MATERIAL INCLUDING BENDING, CURVING, THICKNESS REDUCTION, OR ANY OTHER ALTERATION TO THE ORIGINAL SAPPHIRUS STONE & TILE QUARTZ FACTORY MATERIAL.
  • THIS WARRANTY DOES NOT COVER ANY FAILURES DUE TO INADEQUATE SUPPORT FOR THE INSTALLATION. THIS INCLUDES OVERHANGS IN EXCESS OF RECOMMENDED SUPPORT GUIDELINES OR AN UNSUPPORTED BASE.
  • AS SAPPHIRUS STONE & TILE'S QUARTZ SLABS CONTAIN NATURAL QUARTZ, THIS WARRANTY DOES NOT COVER NATURAL VARIATIONS IN THE COLOR , SIZE, AND PATTERN MOVEMENT OF THE SLABS. THESE CHARACTERISTICS ARE INHERENT IN THE QUARTZ STONE. THE CUSTOMER IS RESPONSIBLE TO PERFORM A VISUAL INSPECTION OF THE SLABS DURING PURCHASING TO ENSURE THE SELECTED SLABS MEET HIS/HER SPECIFICATIONS. IF AFTER OR DURING INSTALLATION, THE CUSTOMER DECIDES TO CHANGE COLORS, EDGING PROFILES OR FINISHES, THIS DECISION IS NOT COVERED UNDER THIS WARRANTY.
  • SAMPLES PROVIDED TO CUSTOMERS, FABRICATORS, AND INSTALLERS MAY NOT MATCH TO THE ACTUAL STONE. SAPPHIRUS STONE & TILE'S QUARTZ IS MADE OF NATURAL QUARTZ. VARIATION IN COLOR , SHADE, PATTERN, AND GRAIN SIZE IS EXPECTED OF THIS NATURAL PRODUCT. SAMPLES ARE SMALL PIECES CUT FROM A SLAB; THEY DO NOT DISPLAY ALL THE CHARACTERISTICS OF THE ACTUAL SLAB. PURCHASES SHOULD NEVER BE MADE BASED ON SAMPLES ALONE. WE RECOMMEND THE CUSTOMER TO INSPECT AND APPROVE THE ACTUAL SLABS TO ENSURE THE RIGHT COLOR IS PURCHASED.
  • THERE MAY BE SPOTS AND SMALL BLEMISHES IN THE STONE. THESE ARE INHERENT IN THE MANUFACTURING PROCESS AND DO NOT AFFECT THE STRUCTURAL INTEGRITY OF THE MATERIAL. THIS WARRANTY DOES NOT COVER SPOTS AND/OR BLEMISHES SMALLER THAN 18 MM (0.705 INCHES) IN DIAMETER. THE CUSTOMER, FABRICATOR, AND INSTALLER SHOULD PERFORM A THOROUGH INSPECTION OF THE SLABS DURING PURCHASING. THIS WARRANTY DOES NOT COVER SPOTS AND BLEMISHES SMALLER THAN 18 MM (0.705 INCHES) IN DIAMETER DISCOVERED LATER IN THE FINISHED COUNTERTOPS.
  • THIS WARRANTY DOES NOT COVER SAPPHIRUS STONE & TILE'S QUARTZ PRODUCTS EXPOSED TO OUTDOOR WEATHER AND CLIMATE CONDITIONS, ABNORMAL USE OR CONDITIONS, OR ABUSE IN ANY WAY. ABNORMAL USE OR CONDITIONS INCLUDE, BUT IS NOT LIMITED TO, DAMAGE FROM MISHANDLING OR MISUSE, DAMAGE FROM EXCESSIVE HEAT OR EXPOSURE TO WEATHER CONDITIONS, EXPOSURE TO ULTRAVIOLET LIGHT, PHYSICAL OR CHEMICAL ABUSE, AND DAMAGE FROM IMPROPER CARE AND MAINTENANCE. DO NOT USE PRODUCTS LIKE SOS, OVEN CLEANERS, BLEACH, SILVER CLEANERS, TARNISH REMOVERS, OR ANY OTHER SIMILAR PRODUCTS. DO NOT ATTEMPT TO SEAL THE PRODUCT OR USE ANY ABRASIVE OR HARSH SCRUBBING PADS. NEVER USE PAINT REMOVERS, STRONG ALKALINE, ACID OR OXIDIZING SUBSTANCES AND PRODUCTS WITH PUMICE.
  • THIS WARRANTY DOES NOT COVER FLOORING APPLICATIONS.
  • THIS WARRANTY DOES NOT COVER SEAM APPEARANCE AND SEAM PERFORMANCE. SEAM PERFORMANCE CAN FAIL WITH SHIFTING OR MOVEMENT OF THE SUBSTRATE, FOUNDATION AND CABINETS, OR FROM THERMAL SHOCK. THERMAL SHOCK CAN HAPPEN WITH ROASTING OVENS, HEAT LAMPS, CROCK POTS, GRIDDLES, ELECTRIC FRYING PANS, OR ANY SOURCE THAT CAN CREATE EXCESSIVE HEAT.
  • SAPPHIRUS STONE & TILE'S QUARTZ IS NOT LIABLE FOR ANY LOSS OF DIRECT OR INDIRECT, CONSEQUENTIAL, INCIDENTAL, PUNITIVE, OR ANY OTHER SIMILAR DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT IN RESIDENTIAL APPLICATIONS COVERED BY THIS WARRANTY. THIS INCLUDES BUT IS NOT LIMITED TO, LOSS OF USE, LOSS OF PROFITS, BUSINESS INTERRUPTION, AND/OR ANY OTHER LOSSES.
  • SAPPHIRUS STONE & TILE'S QUARTZ IS NOT RESPONSIBLE FOR DAMAGES OR INJURY CAUSED BY ACTS OF GOD, JOB SITE CONDITIONS,ARCHITECTURAL AND ENGINEERING CHANGES, STRUCTURAL MOVEMENT, ACTS OF VANDALISM, AND ACCIDENTS THAT OCCURRED AT JOB SITES THAT MAY CAUSE DAMAGE TO THE MATERIAL.
  • THIS WARRANTY ONLY APPLIES TO PRODUCTS THAT HAVE BEEN PAID FOR IN FULL.
  • IN THE EVENT OF A DEFECT IN THE PRODUCT, SAPPHIRUS STONE & TILE INC. HAS THE OPTION TO REPAIR OR REPLACE THE COUNTERTOPS. UPON THE COMPLETION OF INSPECTION, SAPPHIRUS STONE & TILE  INC. WILL DECIDE TO EITHER REPAIR OR REPLACE THE INSTALLED SURFACE. IF REPLACEMENT IS REQUIRED, EXACT COLOR MATCHING CANNOT BE GUARANTEED. IF THE COLOR IS DISCONTINUED AT THE TIME OF REPAIR/REPLACEMENT, THE CUSTOMER NEEDS TO SELECT AN ALTERNATIVE COLOR . THIS OPTION TO REPAIR/REPLACEMENT DOES NOT APPLY TO FINAL SALES.
  • TO OBTAIN SERVICE UNDER THIS RESIDENTIAL WARRANTY, YOU MUST CONTACT THE ENTITY WHO SOLD YOU SIO4 QUARTZ SLABS WITHIN THIRTY (30) DAYS OF THE FAILURE OF THE PRODUCT. THE WARRANTY CLAIM MUST BE FILED WITHIN THIRTY (30) DAYS.
  • TO CLAIM THIS WARRANTY, YOU MUST PROVIDE PROOF OF PURCHASE IN THE FORM OF A COPY OF YOUR ORIGINAL INVOICE OR RECEIPT SHOWING THE NAME OF THE OWNER WHO PURCHASED AND INSTALLED SAPPHIRUS STONE & TILE'S QUARTZ PRODUCTS IN HIS/HER RESIDENCE/COMMERCIAL PROPERTIES (FIRST OWNER). WITHOUT PROOF OF PURCHASE, THIS WARRANTY IS VOID.
  • THIS RESIDENTIAL LIFETIME WARRANTY APPLIES ONLY TO SLAB PURCHASES AND DOES NOT APPLY TO PRE- FABRICATED COUNTERTOPS (ALSO COMMONLY REFERRED AS PRE-MADES OR BLANKS COUNTERTOPS). IT IS THE SOLE RESPONSIBILITY OF THE PURCHASER TO INSPECT THOROUGHLY THE PRE-FABRICATED COUNTERTOPS PRIOR TO ANY LABOR ADJUSTMENT, FABRICATION, AND/OR INSTALLATION. SAPPHIRUS STONE & TILE'S QUARTZ WILL NOT RECOGNIZE ANY CLAIM AFTER THE PRE-FABRICATED COUNTERTOPS HAVE BEEN INSTALLED.
  • ALL DECISIONS REGARDING THIS WARRANTY ARE TO BE MADE BY SAPPHIRUS STONE & TILE INC. NO DISTRIBUTOR, FABRICATOR, INSTALLER, OR ANY PERSON IS AUTHORIZED TO MAKE ANY WARRANTY STATEMENTS AND PROMISES REGARDING SAPPHIRUS STONE & TILE'S QUARTZ SURFACING MATERIALS.
  • SAPPHIRUS STONE & TILE INC. MAKES NO OTHER WARRANTY, REPRESENTATION OR GUARANTEE, EXPRESS OR IMPLIED, WITH RESPECT TO ITS PRODUCTS, EXCEPT AS EXPRESSLY STATED HEREIN.