NORDIC GREY RECTIFIED PORCELAIN TILE
SAPPHIRUS STONE & TILE INC.
Sale price
$6.49
Regular price
$15.75
- GENERAL DESCRIPTION
- SPECIFICATION
- USAGE
- INSTALLATION
Nordic Grey Porcelain Tile is a marble-effect porcelain tile and forms part of our Marble Sense. This tile is offered with a Polished Fully Lappato finish and is available in 6 different faces.
Size Option(inch) : 24''x48''
Size Option(cm) : 60cmx120cm
Surface : Full Lappato | Polished
Thickness : 8.5 mm
Finish : Rectified
Inkjet : Yes
Nuans : V3 Slight
*Frost Resistance : Yes
**PEI : 4
***R Rating : R10
*Sapphirus Stone & Tile Inc. shouldn't be held responsible for the installation of this product. A proffesional installation is recomended.
**This is an indication of the friction or abrasion resistance of the tile finishing surface.
PEI 3: For light traffic. Residental floor protected against abrasive agents such as sand, gravel and soil.
PEI 4: For medium traffic. Residential or light commercial floor protected against abrasive agents such as sand, gravel and soil. Example: Residential kitchen, office, boutiques.
PEI 5: High traffic. Residential or commercial floor. Example: cafés, hotels, restaurants.
***The measurement method specified in DIN 51130 distinguishes among the following R Slipperiness Classes and provides indications as to where they may be used;
R10 : SHARED TOILETS AND SHOWERS,SMALL KITCHENS IN RESTAURANTS AND CAFES,GARAGES AND BASEMENTS.
R11 : FOOD PRODUCTION FACILITIES ; MID-SIZED KITCHENS IN RESTAURANTS AND CAFES, WORKING ENVIRONMENTS WHERE THERE IS A A LOT OF WATER AND SLUDGE, LABORATORIES, LAUNDRIES, HANGARS.
- Bath Floors/walls
- Comm. Interior Floor
- Comm. Interior Walls
- Res. Interior Floors
- Res. Interior Walls
- Shower Floors
- Shower Walls
*Usage recommendation must be confirmed by your installer and depends on application, installation methods and general suitability. Sapphirus Stone&Tile Inc. assumes no liability from any installation and usage recommendations.
Get the most out of your Sapphirus Stone&Tile Inc. product by following these helpful instructions for installing floor tile. A Few Dos & Don’ts
- Tile may be installed over most structurally sound substrates if they are clean, smooth, dry and free of wax, soap scum and grease and other debris.
- Carefully read and follow all instructions and precautions on the adhesive or mortar package. Mix only enough to be used within 30 minutes.
- Since variation of shades is an inherent characteristic of ceramic tile, mix tiles from several cartons as you set, for a blended effect.
- Order extra material for cuts, spare tiles, and waste.
- If material is face taped, remove tape after installation.
- Be sure to calculate exact tile needed for your surface before installation.
- If you are short of material do not start installation until you have all the tile that blends. Additional shipments may not match the tile from previous shipment.
- If you do order additional tile for an older job be sure to match color lots before installation.
SAPPHIRUS STONE&TILE INC. AND ITS AFFILIATES ARE NOT RESPONSIBLE FOR ANY CLAIMS AS A RESULT OF THESE SUGGESTIONS. YOU MUST USE A PROFESSIONAL MARBLE INSTALLER AND PREMIUM SETTING MATERIALS.