48-inch x 72-inch Twilight Book-Matching 9mm Polished Rectified Porcelain Slab Floor and Wall Tile (48''x72'' 2 pieces/case - 48 sq.ft./case)
SAPPHIRUS STONE & TILE INC.
Sale price
$12.50
Regular price
$22.50
- GENERAL DESCRIPTION
- USAGE
- INSTALLATION
Twilight Book-Matching Polished 48 in. x 72 in. Porcelain Tile offers the much sought-after look of gorgeous Blue-Gold marble. Beautiful and easy to care for, this polished rectangular tile is a home owners dream. Use it as kitchen backsplash tile or to create a head-turning accent wall. In the bathroom it performs splendidly as shower surround tile - transforming ordinary baths into extraordinary ones. Due to its resilience, this marble look tile is also suitable for light commercial applications. This is a rectified tile, mechanically finished on all sides to achieve uniformity. Its precise sizing allows for a thinner grout joint - which results in a clean, professional install and reduces staining issues.
- 48 square feet, 2 pieces per case. Case weight is 200 lbs.
- Grade 1, porcelain tile for floor, wall use
- 48 in. width x 72 in. length x 0.35 in. thick
- Glazed polished finish with a high sheen and a slight variation in tone
- P.E.I. Rating III is suitable for medium-duty residential floors including kitchens, halls, corridors, balconies, terraces and areas used more often with normal footwear and small amounts of dirt
- Impervious tile has water absorption of less than 0.5% for indoor or some outdoor use and is frost proof
- C.O.F. greater than 0.50 is recommended for standard residential applications and is marginally skid resistant; indoor use
- Completely frost resistant for indoor or some outdoor applications
- Residential and commercial use
- Don't forget your coordinating trim pieces, grout, backer-board, thin-set and installation tools
- Recommended you purchase a minimum of 15% overage to account for design cuts and patterns.
- GREEN GUARD indoor air quality certified and GREEN GUARD children and schools certified product
- To ensure consistency of size and colour, please capture all tiles for a project within 1 order, each item within an order is selected from a single colour (dye lot) and size (caliber), so multiple orders may receive various colours and/or sizes
- Ceramic/porcelain, LVT and natural stone tile within a corresponding series may be produced at different times; while true to the tile, this may cause a variation in colour and size
- Bath Floors/walls
- Comm. Interior Floor
- Comm. Interior Walls
- Res. Interior Floors
- Res. Interior Walls
- Shower Floors
- Shower Walls
*Usage recommendation must be confirmed by your installer and depends on application, installation methods and general suitability. Sapphirus Stone&Tile Inc. assumes no liability from any installation and usage recommendations.
Get the most out of your Sapphirus Stone&Tile Inc. product by following these helpful instructions for installing floor tile. A Few Dos & Don’ts
- Tile may be installed over most structurally sound substrates if they are clean, smooth, dry and free of wax, soap scum and grease and other debris.
- Carefully read and follow all instructions and precautions on the adhesive or mortar package. Mix only enough to be used within 30 minutes.
- Since variation of shades is an inherent characteristic of ceramic tile, mix tiles from several cartons as you set, for a blended effect.
- Order extra material for cuts, spare tiles, and waste.
- If material is face taped, remove tape after installation.
- Be sure to calculate exact tile needed for your surface before installation.
- If you are short of material do not start installation until you have all the tile that blends. Additional shipments may not match the tile from previous shipment.
- If you do order additional tile for an older job be sure to match color lots before installation.
SAPPHIRUS STONE&TILE INC. AND ITS AFFILIATES ARE NOT RESPONSIBLE FOR ANY CLAIMS AS A RESULT OF THESE SUGGESTIONS. YOU MUST USE A PROFESSIONAL MARBLE INSTALLER AND PREMIUM SETTING MATERIALS.